Solid wood dining chairs are specially designed for dining and are a type of restaurant furniture.
CARE AND MAINTENANCE
The biggest advantage of the solid wood chair is the natural wood grain and the changing natural colors. Since solid wood is an organism that breathes continuously, it is recommended to place it in an environment with suitable temperature and humidity. At the same time, it is necessary to avoid placing beverages, chemicals or overheated objects on the surface, so as not to damage the natural color of the wood surface. If it is made of melamine board, when there is a lot of dirt, Hejunxinmei recommends using a diluted neutral detergent with warm water to wipe it once, and then wipe it with water. Remember to wipe off the remaining water stains with a soft dry cloth. After it is completely wiped, use maintenance wax to polish it. Even if you are done, only by paying attention to daily cleaning and maintenance can wooden furniture be made lasting for a long time.
SOLID WOOD DINING CHAIR
1: Pay attention to the cleaning and maintenance of the surface of the dining table and chairs. Regularly wipe off the floating dust on the surface with a dry and soft cotton cloth. Every once in a while, use a damp cotton thread that has been wrung out of water to wipe off the dust on the corners of the dining table and chairs, and then use a clean dry soft cotton cloth. wipe. Avoid using alcohol, gasoline or other chemical solvents to remove stains.
2: If there is any stain on the surface of the dining table and chair, do not rub it hard. Use warm tea water to gently remove the stain. After the water evaporates, apply a little wax on the original part, and then gently rub it several times to form a protective film.
3: Avoid scratches with hard objects. When cleaning, do not let the cleaning tools touch the dining table and chair, and usually pay attention not to let hard metal products or other sharp objects collide with the dining table and chair to protect the surface from scratches.
4: Avoid humid environment. In summer, if there is flooding in the room, it is advisable to use thin rubber pads to separate the parts of the dining table and chairs from the ground, and at the same time keep the distance between the walls of the dining table and chairs and the wall at a distance of 0.5-1 cm.
5: Keep away from heat sources. In winter, it is best to place the dining table and chairs at a distance of about 1 meter from the heating flow to avoid long-term baking, which may cause local drying and cracking of the wood, deformation and local deterioration of the paint film.
6: Avoid direct sunlight. You should try to avoid the long-term exposure of the dining table and chairs to the whole or part of the outdoor sunlight, so it is best to place them in a place that can avoid the sunlight. In this way, it will not affect the indoor lighting, but also protect the indoor dining table and chairs.